Home > Nappies >All in one nappies

| Itti Bitti Tutto (one-size) | Itti Bitti Tutto instructions & Care | Order |

Bitti Tutto Fitting, Sizing and Care Information

How to use and sizing
Washing and caring for your Bitti Tutto nappy

How to use the bitti tutto one size nappy

The bitti tutto can be used in four different size settings to suit babies from newborn (approx 3kg) right through to a small child (20kg plus).

Newborn/Small – Similar fit to the small size bitti d’lish

Snap down the front of the nappy as far as it can go. Fasten the front wings around hips to the required setting for your baby.

As most newborns don’t move around a lot, you may not need to use the hip snaps, as the nappy will stay in place without wing droop, you can use them if you wish, just fasten when you fasten each wing.

Soaker Pads: You can use either the long soaker snapped on the blue snaps to the shortest setting, or the shorter soaker with the mini soaker attached.

If your baby is a heavy wetter, you may prefer to use the long soaker snapped on the blue snaps to the shortest setting, with the mini soaker attached.

Medium – similar fit to the medium size bitti d’lish

Snap down the front of the diaper to the second smallest setting, leaving one row of snaps showing. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket.

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the medium setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the medium setting, with the mini soaker attached, snapped in at the back (yellow to yellow).

Large - Similar fit to the Large Size bitti d’lish

Snap down the front of the nappy to the top row of snaps, leaving two rows of snaps showing. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket. If you are using the outer snaps around the waist and don’t need the hip snaps, replace the hip snap covers, so no snaps will touch your baby’s delicate skin.

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the large setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the large setting, with the mini soaker attached, snapped in at the back (yellow to yellow). You can use the shorter soaker pad as well snapped in at the other end if you find you need it.

For night time, you can use all three soaker pads, plus add an extra itti bitti mini booster to the short soaker pad for extra absorbency.

Extra Large – Higher Rise and Larger Waist Adjustment than Large Size bitti d’lish

Leave the front of the nappy unsnapped, so it is at the maximum length. Fasten the front wings to the required setting for your baby.

You may wish to use the hip snaps to help give a fantastic fit, simply fasten the hip snaps at the same time you are fastening the front wings. If using the hip snaps, you can tuck the hip snap cover away in the hidden pocket. If you are using the outer snaps around the waist and don’t need the hip snaps, replace the hip snap covers, so no snaps will touch your baby’s delicate skin.

Soakers Pads: You can adjust the soaker pads in any combination of ways that you find best suits your baby, but we recommend starting with the following:

For boys use the long soaker pad adjusted to the largest setting, with the mini soaker attached, snapped in at the front (yellow to purple).

For girls use the long soaker pad adjusted to the largest setting, with the mini soaker attached, snapped in at the back (yellow to yellow). You can use the shorter soaker pad as well snapped in at the other end if you find you need it.

For night time, you can use all three soaker pads, plus add an extra itti bitti mini booster to the short soaker pad for extra absorbency.

bitti tutto vs bitti d’lish

Whilst the bitti tutto is very trim for a one size nappy, however for the ultimate in trimness and perfect fit, especially under clothes, you just can’t go past the bitti d’lish sized nappies.

You can interchange the soaker pads from bitti d’lish and bitti tutto, just bear in mind that you would need to use a medium bitti d’lish booster set on the bitti tutto in a medium setting for example.

Please Contact Us should you have any queries about the best fit Itti Bitti for your baby.

Washing and Caring for you Itti Bitti Tutto
To wash your nappies, we recommend dry-pailing: simply remove any solids and place the nappy into a bucket or wetbag until you have enough for a load. You can rinse your Itti Bitti nappies, then place wet in the nappy bucket if you prefer. There is no need to soak or use bleach/sanitising products, as they can irritate sensitive skins and reduce the life of the elastic in your nappies. We recommend you do a cold water rinse cycle first, then a normal cold, warm or hot cycle with half the recommended amount of detergent (half the amount recommended for heavy soiling) and no fabric softener (do not use detergents which contain fabric softener, (e.g. 2-in-1 products) as they can reduce absorbency). Should you have any stains remaining after washing, leave the nappy in the sun for a short time and the stains will be naturally bleached by the sun. Adding a cup of soda crystals to your rinse or wash can help wtih this also.

Itti Bitti Tutto nappies can be dried in the drier or on the line or airer indoors. If line drying we recommend that you hang nappies inside out to reduce fading in the sun. Do not hang the nappies with the elastic stretched out. It is not recommended to leave the snap in soakers and boosters attached for washing/drying as there is the potential for snaps to rip out and elastic to deteriorate quicker than normal due to extra stretching from the weight of the soakers.

Fabrics have been prewashed at least once to remove excess dyes (bamboo three times to help get your nappies to maximum absorbency), however we recommend dark nappies be washed separately for the first few washes. We recommended you prewash your new nappies at least once prior to use, to remove any traces of manufacturing residues on the fleece, which occasionally, can cause wee to run straight out of the nappy. Natural fibre soakers and boosters will gain maximum absorbency after 2-3 washes.

You may wish to do an occasional strip wash to move detergent residue, which can sometimes cause build up and reduce the performance of your nappies. One way to do this is to wash your nappies on 60ºC , with a cup of soda crystals, then continue to rinse until there are no more bubbles.

The suedecloth lining of Itti Bitti Tutto nappies and other synthetic fabrics can pick up fluff, particularly from terry squares or other cotton terry nappies. If you wish to avoid this, wash terries etc separately from your coloured and synthetic fabric nappies, or use laundry bags to reduce fluffing.

See the above info on using the Tutto nappy for help in assembling your nappies after washing. The outer ‘shell’ of the Itti Bitti Snap in AIO’s can be reused if it is not soiled, with an extra set of soakers. Simply remove the wet soakers and snap in a new set.

For further information on dry pailing or specific questions about washing nappies please email us.

To order itti biiti tutto please click on the link.